What To Do If Your Water Heater Unexpectedly Stops Working
What To Do If Your Water Heater Unexpectedly Stops Working
Blog Article
We've unearthed this article involving What Would Cause My Electric Water Heater to Stop Working? listed below on the internet and thought it made sense to talk about it with you on this page.
Several modern houses take advantage of an electric water heater for their heating unit, because of its ease and simplicity of use. Nevertheless, similar to any other electrical home appliances, issues might arise with its use, all of a sudden. It can be truly discouraging to wake up to a cold shower instead of a hot one or having your bath with water that isn't warm adequate or perhaps too hot. Whatever the situation might be, water heater issues can be rather stressful. Thankfully, we've made a list of possible solutions to your water heater issues. There are a number of factors that could cause many of these troubles, maybe a concern with the power supply, the electric burner, or the thermostat. Prior to doing anything, ensure you shut off the main power supply for safety. Whatever the problem is, getting it fixed should not posture way too much of a concern if you comply with these steps:
Inspect Your Power Supply:
As basic as this may appear, it is really needed. Without appropriate power, your water heater will not function. So the first thing to do when your water suddenly stops working is to verify that it isn't a power trouble. Inspect if the fuse is burnt out or the circuit breaker tripped. If the circuit breaker is the issue, simply transform it on and off once again. Change any type of broken or worn-out fuse. Test the appliance with power after these adjustments to see if it's currently functioning.
Inspect the Heating Element in the Water Heater:
If it's not a power problem, after that attempt taking a look at your heating element if it is still working. Test each of your burner to ensure the issue isn't with any of them. If any of them is damaged, change that part and then examine whether the warm water is back on.
Inspect Your Thermostat:
If your water heater still isn't working or the water appearing isn't warm enough, you might require to inspect the temperature setups on your top thermostat. Guarantee the circuit breaker is turned off prior to doing anything. Open the accessibility panel as well as press the red button for temperature level reset over the thermostat. This ought to help warm the water. Turn the circuit breaker back on and also inspect if the problem has actually been fixed.
Call A Professional:
If after changing all malfunctioning parts and also resetting your temperature level, the water heater still isn't functioning, you may need to call a professional plumber for a specialist viewpoint. The problem with your heating unit could be that the hot and cold taps have actually been switched or it might be undersized for the amount of warm water needed in your home. Whatever the situation may be, a specialist plumber would aid resolve the trouble.
Final thought
Water heater troubles are not always significant. A number of them are due to small issues like a blown fuse or damaged heating element. Changing the faulty components should work. However, if you are still not able to solve the issue, give a call to your local plumber to find to get it dealt with.
8 possible reasons why you have no Hot Water
Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.
Water Leak
Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.
Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.
Gas Heater: Gas Leak
If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.
Gas Heater: Pilot Light Problems
There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.
Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.
Gas Heater: Faulty Thermocouple
The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.
Electric Heater: Breaker Blues
Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.
Electric Heater: Reaching The Limit
If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.
Electric Heater: Heating Element
If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.
https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/
We were made aware of that write-up on How to Troubleshoot and Repair an Electric Water Heater through a friend on another web blog. If you liked our blog entry if you please do not forget to share it. Many thanks for taking the time to read it.
Book Your Installation
Report this page